Symbols; Features; Assembly - RIDGID R8604 Operator's Manual

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper in-
terpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's
Manual
Eye Protection
Wet Conditions
Alert
Recycle Symbol
V Volts
min Minutes
Direct Current
n o No Load Speed
.../min Per Minute

FEATURES

PRODUCT SPECIFICATIONS
Cut Capacity.............................................................. 2.5 in.
Blade Type ........................ Bi-metal, 18 teeth per inch (TPI)
Blade Width ............................................................... 0.5 in.
Blade Thickness .................................................... 0.020 in.

ASSEMBLY

WARNING:
Do not use this product if it is not completely as-
sembled or if any parts appear to be missing or
damaged. Use of a product that is not properly and
completely assembled or with damaged or missing
parts could result in serious personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's manual
before using this product.
Always wear eye protection with side shields marked to comply with ANSI
Z87.1.
Do not expose to rain or use in damp locations.
This product uses lithium-ion (Li-ion) batteries. Local, state or federal laws
may prohibit disposal of batteries in ordinary trash. Consult your local waste
authority for information regarding available recycling and/or disposal options.
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
DESIGNATION/EXPLANATION
Blade Length ....................................................... 32.875 in.
Blade Speed (surface feet per minute)
High ................................................................ 680 SFPM
Low ................................................................. 320 SFPM
WARNING:
Do not attempt to modify this product or create ac-
cessories or attachments not recommended for use
with this product. Any such alteration or modifica-
tion is misuse and could result in a hazardous con-
dition leading to possible serious personal injury.
5 — English