Using Wildcards - Intermatic Grasslin talento smart B15 Operating Instructions Manual

USING WILDCARDS

You can use wildcards when entering the date. This allows you to programme recurring switching times to
be carried out; for example, always on the first of the month. Instead of the year or month figures, you can
use the wildcards **** for the year and ** for the month.
To select the wildcard, first enter the year; further options are then suggested. Flashing buttons indicate
where you are, and you can use (+/-) to enter the year or month.
Examples of entering the date with wildcards
Date entry
2016.**.13 – 2016.**.13
****.**.01 – ****.**.01
Action
The switching command is executed on the 13th of every month in 2016.
The switching command is always executed on the first day of each month.
EN
94