A6-Op1; Specifications A6-Op1; Installing The A6-Op1 - Roland A-6 Service Notes

Oct, 1998

A6-OP1

SPECIFICATIONS A6-OP1

A6-OP1 Multi I/O Expansion Board
*SCSI Connector (25-pin D-SUB type)
*Coaxial Digital In Connector
*Coaxial Digital Out Connector
*XLR Analog In Connector
*XLR Analog Out Connector
*CD, VCR In L, R and MONOTOR, MASTER Out L, R (RCA phono
type)

INSTALLING THE A6-OP1

1. Turn off the A-6. Remove all connecting cables from the A-6.
2. Place the A-6 upside down. Remove the bottom cover.
3. Remove the EXP cover from the A-6.
4. Plug in A6-OP1 connector, with a length of the flat cable bent, intothe
A-6 main board connector. See Fig. 1.
5. Screw-lock the A6-OP1.
6. Attach and secure the A6 bottom cover.
7. Enter the test mode: holding down STATUS (track D) and EFFECTS
(track D) buttons of AUDIO RECORDER/MIXER, turn on the A-6.
Verify that upper-right area of the screen displays "OP-1".
8. Turn off the A-6.
A-6
17