Functions; Operating Modes; Function Diagram; Temperature Sensor - Siemens RDJ10RF/SET Manual

Functions

Function diagram

Temperature sensor

Operating modes

Automatic mode
Comfort mode
Energy Saving
mode
Frost Protection
Display
Backup
2/12
Siemens
Building Technologies
The controller acquires the room temperature using its integrated sensor.
Q14
L1
ON
W
OFF
SD
The RDJ10RF provides room temperature control only.
The RDJ10RF has the following modes: Automatic, Comfort, Energy Saving, and Frost
Protection.
Move the operating mode slider to the respective position to changeover between the
operating modes
Automatic mode is active, when the symbol
The RDJ10RF operates per the selected 24-hour time program.
Comfort mode is active, when the symbol
The RDJ10RF controls to the temperature setpoint adjusted at
This setpoint can be readjusted by setting the programming slider to
Energy Saving mode is active, when the symbol
The RDJ10RF controls to the temperature setpoint adjusted at
This setpoint can be readjusted by setting the programming slider to
Frost Protection is active, when the symbol
The RDJ10RF controls to the fixed temperature setpoint for frost protection.
The digital display displays the actual room temperature and the comfort temperature
setpoint. The triangle symbol appears when the heating output is active.
Setpoints and information required for operating mode changeover are retained when
exchanging batteries. The values must be checked though. The time goes to 12:00 pm
and must be reset
Room temperature controllers
T Room temperature
SD Switching differential (1 K)
W Room temperature setpoint
L1 Output signal for heating
T[°C]
appears on the display.
appears on the display.
appears on the display.
.
.
appears on the display.
.
.
CE1N3072en
2014-04-04
.
.
.