Hardware Description; Device Connections And Buttons - Watchguard AP327X Hardware Manual

WatchGuard AP327X Hardware Guide

Hardware Description

Device Connections and Buttons

Ethernet Network Interfaces
LAN1: Standard RJ45 connector that supports link speeds of 10/100/1000 Mbps and 802.3at PoE+
connectivity. You can power the WatchGuard AP327X with a PoE+ connection on the LAN1
interface.
LAN2: Standard RJ45 connector that supports link speeds of 10/100/1000 Mbps. In Wi-Fi Cloud, you
can configure this interface as a wired extension on an SSID. For more information, see the
WatchGuard Wi-Fi Cloud Help .
For APs managed locally by a Gateway Wireless Controller, you can bridge together the LAN ports
on AP models that have two LAN interfaces. This enables you to extend the wired network on the
LAN2 interface. For more information, see the Fireware Help .
4 WatchGuard Technologies, Inc.