Mounting Instructions; Pole Mount Installation - Watchguard AP327X Hardware Manual

Mounting Instructions

Your package includes pole-mount and wall-mount accessories for your AP.
The MAC address and serial number of your AP are printed on a label on the back of the
device. Make sure you record this information before you mount the AP.

Pole Mount Installation

Use the supplied pole-mounting accessories to install the AP327X on a pole.
1. Place the AP on the pole.
2. Insert the clamps in the slots on the AP and wrap around the pole.
3. Fasten the screws and make sure the AP is firmly attached to the pole.
WatchGuard Technologies, Inc.
WatchGuard AP327X Hardware Guide
9