Advertisement
Available languages
Available languages
Indicator light
Flash sequence
light permanently on
(=operation)
rapid flashing (=error)
slow flashing
double flashing
Significance
The appliance pre-heats and the
pump is active.
The coffee outlet has not been
fitted.
The locking ring is not closed
properly.
The water level is below the
minimum-level mark.
The magnet in the water
container has become stuck.
The water container has not been
inserted correctly.
The system pre-heats before the
actual brewing cycle.
The brewing cycle is coming to
an end, and the system indicates
a necessary waiting period during
which the pressure is reduced.
Warning: wait for the flashing to
stop before pushing the ring up.
If the appliance is not used for a
period of around 5 minutes with
the locking ring in its down
position, the indicator light starts
flashing.
11
Remedy
-
Fit the coffee outlet.
Push the ring down to
ensure the unit is properly
closed.
Replenish.
Try to free the magnet by
gently
shaking
container.
Remove and replace
correctly.
-
Push the ring up and
remove the pad. For
reasons of hygiene, leave
the ring in its open
position.
the
Advertisement
