Maintenance - Hoover zoom Manual

Maintenance

WARNING! Always switch off the cleaner and remove the battery before carrying out any
maintenance.
IMPORTANT! If your vacuum does not pick up properly, makes an unusual noise or the dust
bag does not fluff up or balloon open, follow these steps:
Cleaning the Brush Bar
1
2 3
12.
1. Ensure the cleaner is completely switched off & remove the battery
from the battery terminal by pressing the Battery Release Button.
Then disconnect the body of the cleaner from the power head.
2. Remove the three screws on the bottom of the power head as
shown. The brush bar base plate can now be removed by gently
lifting.
3. Remove the brush bar by lifting the right side out of the roller guide.
4. Remove the brush bar from the belt assembly by pulling the belt
towards you and sliding the brush bar out.
Remove all debris from the brush bar.