Bush Hog RTXG Series Operator's Manual page 65

TOP GEARBOX
1. Remove the vent plug with dip stick on the top of the gearbox.
2. Pour the gear oil into the vent plug hole slowly checking the oil level with the dip stick until the oil reaches
the full mark on the dip stick. DO NOT OVERFILL THE GEARBOX!
3. Replace the vent plug and dip stick. Clean up any excess gear oil.
SIDE GEARBOX
1. Remove the vent plug on the top of the side gearbox and the small inspection plug at the side of the
gearbox.
2. Pour the gear oil into the vent plug hole slowly until the oil starts to come out of the small hole on the side.
DO NOT OVERFILL THE GEARBOX!
3. Replace the small Inspection Plug and the Vent Plug. Clean up any excess gear oil.
RTXG SERIES TILLER 5/19
© 2020 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-3