Bush Hog RTXG Series Operator's Manual page 49

Tiller ID#________________________ Make__________________________
Date:___________________________ Shift___________________________
Before conducting the inspection, make sure the tractor engine is off, all rotation
has stopped and the tractor is in park with the parking brake engaged. Make sure
the blade is resting on the ground or securely blocked up and all hydraulic pressure
has been relieved.
The Operator's Manual is in the Canister on the
All Safety Decals are in place and legible.
The Hitch connection bolts & pins are tight.
There are no cracks in Hitch.
The Tiller deck is clear of mud, dirt and debris
Chain guards/Deflectors are in place & in good
Driveline/Gearbox shields are in good condition
Driveline clutches are in good condition, not fro-
Driveline telescoping members & u-joints are
Driveline yokes are securely attached to PTO &
Gearbox mounting bolts are tight
Gearbox oil is at the proper level
Tiller shaft bearings bolts are tight
Bearings are lubricated
Tiller tines are not chipped, cracked or bent
Tiller tines are tight
Rear deflector shield is in place and in good con-
Operator's Signature:_____________________________________________________
DO NOT OPERATE an UNSAFE TRACTOR or IMPLEMENT
RTXG SERIES TILLER 5/19
© 2020 Alamo Group Inc.
OPERATION
Tiller PRE-OPERATION Inspection
Table 1:
Item
Operation Section 4-17
Condition at Specific Comments if
Start of Shift not O.K.