Advertisement
13. Install the two Front Floor Console Cover Trim Plate fasteners (Item #2).
14. Install the left side Front Floor Console Extension (Item #1) ensuring the
retainers are fully-seated.
15. Return the left and right side front seats to their original positions.
Section 2: CUE Touch Panel Replacement
Introduction:
Workflow: Both side brackets are removed, followed by the rear cover. The
hidden compartment is removed, allowing access to the Touch screen retaining
screws and ribbon connector.
Note: During the CUE Control Assembly Rear cover removal/replacement, two
types of Phillips head screws are used. The coarse-threaded screws are for plastic-
to-plastic fastening. The finer-threaded screws are used for securing the plastic
cover to the metal CUE Control Assembly brackets.
Advertisement
