Invacare AVIVA RX Series Service Manual page 44

Invacare® AVIVA™ RX series
1. Unlock castor lock C.
2. Remove front part of main frame shrouds. See 6.7.3
Main Frame Shrouds, page 26.
3. Loosen and remove screw A, washer B and locking
device C.
4. Install parts in reverse order. Make sure to install screw
including washer to correct mounting hole of locking
device.
5. Test all functions.
Replacing Locking Plate on Single-Sided Forks
• 4 mm Allen key
• 5 mm Allen key
1. Place wooden block underneath mobility device and
prop up mobility device.
2. Remove wheel.
3. Loosen and remove screw B and locking plate A.
4. Install parts reverse order.
5. Test all functions.
Replacing Locking Plate on Double-Sided Forks
This component is not serviceable. Replace the fork instead.
44
Fig. 6-33
Fig. 6-34
Fig. 6-35
1654647-A