VTech Toot-Toot Drivers Parents' Manual page 11

ASSEMBLY INSTRUCTIONS
Launch & Spin Raceway
With the VTech
®
safety comes first. To ensure your child's safety, adult assembly
is required.
1. Place the Racing Platform right-side up and insert the Gallery,
Gate A and Gate B. Next insert the two Platform Supports into
the slots underneath the Racing Platform, as shown below. You
will hear a "click" sound to indicate the pieces are secure.
Note: Once the Gallery is attached, it cannot be removed.
2. With the Jump Track right-side up, insert the Road Block through
the slot on the Jump Track. Then attach the Jump Track and the
Bumpy Track to the Twin Platform, as shown below.
Toot-Toot Drivers Launch & Spin Raceway,
®
10
10
10