Sony DVCAM DSR-PDX10 Service Manual page 448

Connecting your camcorder to your computer using the USB cable
– For Windows users
Making the computer recognise the camcorder
Make sure that the USB driver has been installed.
Viewing images recorded on a tape
Refer to page 197 for details on viewing "Memory Stick" images on your computer.
You need to install "PIXELA ImageMixer " to view images recorded on a tape on your
computer. Install it from the CD-ROM supplied with your camcorder.
To install and use this software in Windows 2000 Professional. You must be authorised
as Power Users or Administrators. For Windows XP Home Edition/Professional, you
must be authorised as Administrators.
(1) Turn on your computer and allow Windows to load.
(2) Insert the supplied CD-ROM into the CD-ROM drive of your computer.
(3) Move the cursor to "PIXELA ImageMixer" and click.
(4) Select the language for installation.
(5) Follow the on-screen messages.
(6) Click DirectX
(7) Connect the AC power adaptor to your camcorder.
(8) Set the POWER switch to VCR.
(9) Select USB STREAM in
(10) With the CD-ROM inserted, connect the USB jacks of the camcorder and
196
If you are using your computer, close all running applications.
The application software starts up and the title screen appears. If the title
screen does not appear, double-click "My Computer" and then "ImageMixer"
(CD-ROM Drive). The application software screen appears after a while.
The Install Wizard programme starts up and the "Select Settings Language"
screen appears.
The installation screen disappears when installation is complete.
Follow the on-screen messages to install DirectX.
Restart your computer when the installation is completed.
computer using the USB cable supplied with your camcorder.
Your computer recognises the camcorder, and the Add Hardware Wizard
starts.
Push into the end
to ON in the menu settings. (p. 221)
(USB) jack
USB connector
USB cable (supplied)