Eureka REF160S Owner's Manual page 4

How to charge your vacuum cleaner
1. Insert one end of the adaptor into the
charging stand and insert the pronged
end into a wall outlet.
2. Bring the vacuum cleaner down into the
charging base as shown. The charging
indicator light will turn on. When the
unit is fully charged all battery indicator
lights will be lit up. The vacuum cleaner
cannot be turned on during charging.
The appliance must only be charged
indoors.
How to use your vacuum cleaner
1. The handle of the vacuum cleaner has two buttons: Power and Brush roll speed
a. Press the power button to turn on the vacuum cleaner
b. Press the brush roll speed button to either speed up the brush for carpets, or slow
down the brush roll for hard floors.
c. Press the power button again to turn off the vacuum cleaner
Note: The battery indicator lights on your vacuum cleaner will go down as battery power
diminishes. When all lights go out the vacuum will automatically turn off.
b
Using the hand vacuum
1. Press the hand vacuum release button to remove the hand vacuum from the main body
2. Press the power button on the hand vacuum to turn it off and on
3. The dusting brush or the crevice tool can be use by snapping them on the suction inlet
of the hand vacuum
Crevice tool
Dusting brush