Download Print this page
Pyle SereneLife SLELT367 User Manual
Pyle SereneLife SLELT367 User Manual

Pyle SereneLife SLELT367 User Manual

36’’ kids trampoline

Advertisement

Quick Links

by
SLELT367
36'' Kids Trampoline

Advertisement

loading

Summary of Contents for Pyle SereneLife SLELT367

  • Page 1 SLELT367 36’’ Kids Trampoline...
  • Page 2: Safety Instructions

    www.PyleUSA.com SAFETY INSTRUCTIONS 1. Misuse and abuse of this trampoline is dangerous and can cause serious injuries. 2. All purchasers and all persons using the Trampoline must become familiar with the manufacturer's recommendations for proper assembly, use and care of the Fitness Trampoline. 3.
  • Page 3 www.PyleUSA.com Parts List Parts Description Quantity Frame Jumping Mat Elastic Band Protective Padding Covering Cap Handrail Tube Kitbag...
  • Page 4: Assembly Instruction

    www.PyleUSA.com Assembly Instruction WARNING 1. Keep children away from the trampoline during assembly. 2. Keep ngers away from the ends of the rails in the hinge area when unfolding the trampoline. The RAILS will try to spring back to the folded position if they are released before the snap into place. Serious injury can occur if ngers are caught between the ends of the RAILS.
  • Page 5 www.PyleUSA.com STEP 2 Remove the bracket pin from both ends of the trampoline, and place them to the side. STEP 3 Both persons press rails C and D, and using steady pressure, with hands open and ngers extended, use palm of hands to push rails A and B down until they touch the ground. Make sure that all joints are locked into place.
  • Page 6 www.PyleUSA.com STEP 4 Insert the PIN back to the bracket to prevent rails from snapping together when you reach the at position STEP 5 Remove the covering cap on the threaded connector, and slide the protective padding (#4) over the unfolded frame.
  • Page 7: Care And Maintenance

    www.PyleUSA.com STEP 6 Turn the frame upside down. Screw the six feet on to the threaded connectors on the underside of the frame. Turn the trampoline over and place it on its feet. STEP 7 Insert the two handle support tube (#A) into trampoline base handle brackets. Attention: Bends of handle support face up and toward center of trampoline.
  • Page 8 www.PyleUSA.com WARNING IMPORTANT – PLEASE READ! WARNING – GENERAL SAFETY ADVICE • Please read the instructions before use and retain for future reference. • Ensure the trampoline has been assembled correctly, as per the instructions in the manual. • It is essential that the intended site for this trampoline is completely flat and level. If the ground is un-level this will cause movement in the frame and could cause stress on the joined sections.