Komatsu PC18MR-3 Operation & Maintenance Manual page 130

USE OF THE MACHINE AND RELATED CONTROLS
REAR-VIEW MIRRORS
Always check the cleaning and correct orientation of the rear-view mirrors before starting to work; they
q
must allow to control the rear area control without moving the log in relation to the normal working posi-
tion.
If working with no control at the back of the machine, incautious people who may have entered into the
working zone may be run down, or fixed obstacles or motor vehicles may be crashed during operation.
If rear-view mirrors shall be moved or broken during work, stop the machine immediately and fix or re-
q
place them.
Adjust the inclination of the rear-view mirrors, so that the area behind the cab is well visible.
Machine equipped with canopy
q
Machine equipped with cab
q
Mirror (A) and (B)
Adjust the angle so that the rear panel of the machine is reflect-
q
ed on the mirror.
128
WARNING
RKA26060
WEAM012101