Replacing A Front Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha TMAX ABS Series Owner's Manual

Periodic maintenance and adjustment
Replacing a front turn signal
light bulb
1. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
1. Turn signal light bulb socket
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
2
1
1. Turn signal light bulb
2. Turn signal light bulb socket
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the socket (together with the
bulb) by turning it clockwise.
EAU52323
Replacing the license plate
light bulb
1. Remove the nuts securing the li-
cense plate light unit.
2
1
1. License plate light unit
2. Nut
2. Pull the license plate light unit sep-
arate from the rear fender. (Rein-
stall the collars if they fall out.)
2
1. License plate light unit
2. Collar
3. License plate light bulb
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket,
and push the socket in place.
5. Install the license plate unit onto
the rear fender.
6. Install the nuts and tighten to the
specified torque.
8-32
EAU81491
1
3
1
2
1
3
4
5
6
7
8
9
10
11
12
13
14