Table of Contents
Advertisement
Finishing the indoor unit
installation
1
Mount the tubing holder in the original
position.
2
Ensure that the hooks are properly seated
on the installation plate by moving it left
and right.
3
Press the lower left and right sides of the
unit against the installation plate until the
hooks engage into their slots (clicking
sound).
4
Finish the assembly by screwing the unit
to the installation plate by using two
pieces of type "C" screws. And assemble a
chassis cover.
Type 'C' screw
Checking the Drainage
To check the drainage
1
Pour a glass of water on the evaporator.
2
Ensure the water flows through the drain
hose of the indoor unit without any
leakage and goes out the drain exit.
Drain piping
1
The drain hose should point downward for
easy drain flow.
INSTALLATION
23
Connecting area
drain hose
Leakage
checking
Drain pan
Drain
hose
Leakage
checking
Downward slope
Advertisement
Table of Contents
