1.5 Connecting and Installation
1.5.1 How to connect the receiver to various other systems
There are several ways of connecting the receiver to your TV, VCR and/or Hi-Fi SYSTEM. Consult your local
supplier for assistance in setting-up your system that is best suited to your requirements.
1.5.2 To Connect Satellite and Terrestrial Antenna
(Only Combo)
• Connect one end of RF cable to the ANT IN on the back
of the receiver and the other end to a terrestrial antenna
connection or the jack for the public antenna on the
wall.
DiSEqC 1.0
• Connect the coaxial cable from the LNB to the LNB IN
jack on back of the receiver.
DiSEqC 1.2 Motor
• Connect one end of your coaxial cable to the LNB IN
connector on the receiver and the other end to the
REC or Receiver connector on the DiSEqC 1.2 motor.
• Connect the coaxial cable from the LNB to the LNB
connector on the DiSEqC 1.2 motor.
1.5.3 Connect the receiver to a TV set
• Connect the receiver to a TV set with SCART, if your TV set is equipped for it. Alternatively you can use A/V,
TV out (UHF) or S/Video jacks.
1.5.4 Connect the receiver to a VCR
• Connect the SCART jack from the VCR to the back of the receiver.
• Combo Receiver
8
• Combo Receiver
• Combo Receiver
• Video
• TV