Related Manuals for Triax SHD990
Summary of Contents for Triax SHD990
-
Page 1: Satellite Receiver
Triax Twin Tuner Satellite Receiver www.triaxnz.co.nz NOTE: Please connect the supplied cable between LNB out (loop) and LNB IN 2 if you wish to use the twin tuner capability of the SHD990... - Page 2 All receivers by Triax have been tested working before leaving our CHCH store. NO TUNING of the SHD990 is required to get the standard Freeview channels as they have been pre-programed for you. You should be able to connect to a satellite dish aligned to the satellite and start enjoying digital TV.
- Page 3 Press ‘Back Button’ to save. Note: with Daylight Saving usage ON the time is set to GMT +13. After changing the time you may have to power your SHD990 off. Signal Bars To get signal & quality bars on your SHD990, Press ‘INFO’...
- Page 4 If you connect to an existing dish and have no pictures you may have a 11300 LNB please refer to front of this guide on how to change this. After a factory default of the SHD990 you may have to scan for channels again and put the channels in your prefered order or scan for changes.