Mackie SRM210 V-Class Owner's Manual page 9

Hookup Diagrams continued...
INPUT INPUT
SPEAKER CONTROL
DIRECT OUT DIRECT OUT
PUSH FOR SETTINGS
100-240VAC
50-60 Hz 110W
HIGH-PASS OUT HIGH-PASS OUT
Here's how to set up a large club system. In this example, the L/R outputs of a DL16S mixer are connected directly
to the channel 1 inputs of a pair of DRM18S subwoofers. The Direct Out of each subwoofer is then connected to the inputs
of an additional pair of DRM18S subwoofers.
From here, the high-pass outputs of the two outer DRM18S subwoofers are connected directly to the inputs of a set
of SRM215 | V-Class loudspeakers. The Speaker Modes of these PA loudspeakers may be set to Live (or Club)
and the Subwoofer HPF set to DRM Sub. Talk about beefy low end!
Outputs 1 and 2 from the mixer may be used as aux sends; these are connected directly to the channel 1 inputs of a pair
of SRM215 | V-Class loudspeakers to be used as monitors for the band. The gain knob on all SRM215 | V-Class loudspeakers
in this example should be set to Line. The Speaker Modes of the monitor loudspeakers may be set to Monitor.
SPEAKER CONTROL
SUBWOOFER HPF
DRM SUB
DRM
OFF VAR
SUB
PUSH FOR SETTINGS
INPUT INPUT
SPEAKER CONTROL
DIRECT OUT DIRECT OUT
PUSH FOR SETTINGS
100-240VAC
50-60 Hz 110W
HIGH-PASS OUT HIGH-PASS OUT
Large Club System
SPEAKER CONTROL
SPEAKER VOICING
LIVE
FLAT LIVE MUSIC
CLUB MON INSIDE
PUSH FOR SETTINGS
SPEAKER CONTROL
SPEAKER VOICING
LIVE
FLAT LIVE MUSIC
CLUB MON INSIDE
PUSH FOR SETTINGS
INPUT INPUT
SPEAKER CONTROL
DIRECT OUT DIRECT OUT
PUSH FOR SETTINGS
50-60 Hz 110W
HIGH-PASS OUT HIGH-PASS OUT
INPUT INPUT
SPEAKER CONTROL
DIRECT OUT DIRECT OUT
PUSH FOR SETTINGS
100-240VAC 100-240VAC
50-60 Hz 110W
HIGH-PASS OUT HIGH-PASS OUT
Owner's Manual
9