Mackie SRM210 V-Class Owner's Manual page 6

Hookup Diagrams continued...
In this example, a ProFX10v3 mixer is connected directly to two SRM212 | V-Class loudspeakers. It is the perfect setup
for a small club or... a fun karaoke house party! Simply connect the L/R outputs of the ProFX10v3 mixer to the channel 1
input of each SRM212 | V-Class loudspeaker. The gain knob on both should be set to Line. Don't forget to set the Speaker
Mode on both loudspeakers to Live... or Club if you want a little more low-end thump!
If you desire a little more boom, add a DRM18S subwoofer to the mix. Here, the L/R outputs of a ProFX10v3 mixer
are connected directly to the channel 1 and 2 inputs of the DRM18S subwoofer. Then the High-Pass Outs of the subwoofer
are connected to the channel 1 inputs of a pair of SRM212 | V-Class loudspeakers. The gain knob on both should be set
to Line. Here you will want to set the Speaker Mode to either Live or Club and the Subwoofer HPF to DRM Sub (or Var
if using a different subwoofer).
6
SRM | V-Class High-Performance Powered Loudspeaker Series
SPEAKER CONTROL
SPEAKER VOICING
LIVE
FLAT LIVE MUSIC
CLUB MON INSIDE
PUSH FOR SETTINGS
USB 3-4
USB 1-2
MUTE MUTE MUTE MUTE MUTE MUTE MUTE
SPEAKER CONTROL
SPEAKER VOICING
LIVE
FLAT LIVE MUSIC
CLUB MON
OUTSIDE
PUSH FOR SETTINGS
SPEAKER CONTROL
SUBWOOFER HPF
DRM SUB
DRM
OFF VAR
SUB
PUSH FOR SETTINGS
USB 3-4
USB 1-2
MUTE MUTE MUTE MUTE MUTE MUTE MUTE
INPUT INPUT
SPEAKER CONTROL
DIRECT OUT DIRECT OUT
PUSH FOR SETTINGS
100-240VAC
50-60 Hz 110W
HIGH-PASS OUT HIGH-PASS OUT
Small Club System