Mackie SRM210 V-Class Owner's Manual page 8

Hookup Diagrams continued...
To next
SRM | V-Class
loudspeaker
input
SPEAKER CONTROL
PUSH FOR SETTINGS
CH1 CH2 CH3/4
GAIN
U U
LINE MIC LINE
OFF MAX OFF MAX OFF MAX
SRM | V-Class loudspeakers may be daisy-chained via the male XLR connector labeled "DIRECT OUT" (which sends
only the signal from the input located above it) or via the "MIX OUT" which outputs all inputs. Simply plug the signal
source (i.e., mixer output or microphone) into the input jack(s), and patch that loudspeaker's direct out or mix out jack
to the next loudspeaker's input jack, and so on, daisy-chaining multiple SRM | V-Class loudspeakers. See above for visual
representations of daisy-chaining.
NOTE: Make sure to set the gain knob(s) correctly. In the top diagram, input channel 1 is set to "LINE" and in the bottom
diagram, input channel 1 is set to "MIC".
8
SRM | V-Class High-Performance Powered Loudspeaker Series
SPEAKER CONTROL
PUSH FOR SETTINGS
CH1 CH2 CH3/4
GAIN
U U
LINE MIC LINE
OFF MAX OFF MAX OFF MAX
MUTE MUTE MUTE
ProFX 0v3 Mixer
SPEAKER CONTROL
PUSH FOR SETTINGS
CH1 CH2 CH3/4
GAIN
U U
LINE MIC LINE
OFF MAX OFF MAX
OFF MAX
Daisy-Chaining Multiple SRM | V-Class Loudspeakers
Main
Outs
USB 3-4
LINE
USB 1-2
MUTE
MUTE MUTE MUTE
SPEAKER CONTROL
PUSH FOR SETTINGS
CH1 CH2 CH3/4
GAIN
U U
LINE MIC LINE
OFF MAX OFF MAX
OFF MAX
SPEAKER CONTROL
PUSH FOR SETTINGS
CH1 CH2 CH3/4 CH1
GAIN
U U U
MIC LINE LINE
OFF MAX OFF MAX OFF MAX OFF MAX
To next
SRM | V-Class
loudspeaker
input
SPEAKER CONTROL
PUSH FOR SETTINGS
CH1 CH2 CH3/4
GAIN
U U
LINE MIC LINE
OFF MAX OFF MAX
OFF MAX
To next
SRM | V-Class
loudspeaker
input
SPEAKER CONTROL
PUSH FOR SETTINGS
CH2 CH3/4
GAIN
U
MIC LINE
OFF MAX OFF MAX