Table of Contents
Advertisement
NFN Gateway Configuration
3.2.3 Add the IP Subnet of the NFN Gateway into the
Configuration PC
Use the following steps as a guideline to add the NFN Gateway's IP Subnet to your Configuration
PC's IP Subnet.
Step 1. Start >Control Panel and then select Network Connections. The Network Connection
Step 2. Right click on Local Area Connection and select Properties from the list of choices. The
Step 3. Use the side scroll to display the Internet Protocol (TCP/IP) entry and then click on it.
Step 4. Click on the Properties button. The Internet Protocol (TCP/IP) Properties window
Step 5. Select the Advanced button. The Advanced TCP/IP Settings window displays.
Step 6. Click on the Add button. The TCP/IP Address window displays
Step 7. Type in a Configuration PC IP address value for the following:
Step 8. Click the Add button.
Step 9. Close all remaining open windows. You have completed adding the NFN Gateway
Step 10. You are now ready to perform the
32
window displays.
Local Area Connections Properties window displays.
displays.
Figure 3.3 TCP-IP Address Window
•
IP address (192.168.1.X) where X can be any value except 1 or 3. The gateway
default IP values are:
•
IP Address: 192.168.1.2
•
Subnet Mask: 255.255.255.0
•
Gateway: 0.0.0.0
address to your Configuration PC's list of IP addresses.
NFN Gateway Installation & Operation Manual - P/N: 52306:Rev: D 06/01/07
"Default Gateway Connection" on page
Configuration PC Preparation
33.
Hide quick links:
Advertisement
Table of Contents
