Panasonic SA-PM45E Service Manual page 20

SA-PM45E / SA-PM45EG / SA-PM45EE
Error Code Diagnosis Contents Description of error
H15 CD OPEN
Abnormal
F26 Communication
between CD servo
LSI and micro-p
abnormal.
F61 POWER AMP IC
output abnormal.
SW During normal operation
CD OPEN SW ON fail to be
detected with 4 sec. Error
No. shall be clear by force
or during cold start.
CD function DTMS
command, after system
setting, If SENSE = ´L´
cannot be detected.
Memory shall contain F26
code. After Power on, CD
function shall continue,
error display shall be "NO
DISC". Error No. shall be
clear by force or cold start.
During normal operation, if
DCDET becomes "L",
normal POWER OFF
process shall not be
executed, PCONT shall be
switched to "L"
immediately. "GOODBYE"
shall not be display but the
error display F61
displayed instead.
seconds after the F61
displayed, ECONO shall be
set to "L" and FL display
shall be turned off. The
error content shall be
memorized when the
abnormality occurs and can
be display in the C-mecha
self-diagnostic mode
described later.
Automatic FL Display
is
2
20
Remarks
For CD unit (For Traverse).
Press [ ] on main unit for next
error.
For CD unit (For Traverse).
Press [ ] on main unit for next
error.
For Power Supply Related Error
Detection.
Press [ ] on main unit for next
error.