Janome Continental M7 Professional Instruction Book page 108

Hide thumbs Also See for Continental M7 Professional:
Table of Contents

Advertisement

1 cm (3/8˝)
Replace the foot with the zigzag foot A.
Baste the opened fabric and zipper tape together.
q Basting
q
Replace the foot with the zipper foot E.
Backstitch across the end of opening to 1 cm (3/8˝).
Stitch through the garment and zipper tape, guiding the
zipper teeth along the bottom edge on the foot.
Stop about 5 cm (2˝) from the top of the zipper.
Lower the needle into the fabric, raise the foot and
remove the basting stitches.
w Basting stitches
w
Open the zipper and move the slider to the rear of the
foot.
Lower the foot and stitch the remainder of the seam
making sure the fold is even.
q
Remove the basting stitches.
106
Basting
Sew right side

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents