Adjustment Of The Thread Cutter Mechanism; Static Cutter Blade - ELNA 7100 Servicing Manual

Adjustment of the Thread Cutter Mechanism

q
4 mm
w
4 mm
Align the left edges of the thread
cutter blade nad the static cutter
blade.
e
r
t
e

1. Static Cutter Blade

z Remove the needle plate and base.
x Lower the needle bar to the lowest position. Turn the
handwheel toward you while pushing up the link body
q to engage the thread cutter blade w and bring it
under the static blade e.
c Loosen the setscrews r and adjust the position of the
static cutter blade e so that the distance between the
center of the needle drop position t and the static
cutter blade e is 4 mm and the left edges of the
static blade and thread cutter blade are aligned.
v Tighten the setscrews r. Attach the needle plate and
base.
21