Panasonic SV-SD350VGC Service Manual page 18

Error Code
F001 WARNING occurred at ACORE
F002 ERROR occurred at ACORE
F003 RVCI software error (debug)
F004 CHG PARAM fails to change
F005 No READY interruption
F006 No CHGACK interruption
F007 ACORE driver BG processing queue overflow
F008 ACORE error
F009 Card mount error
F00A Card format violation
F00B Write-protect detection
F00C Card-full detection
F00D TKIFULL detection in 1 folder
F00E Folder-full detection
F011 File reading error
F012 File writing error
F013 FS general error
F014 Frame header for encode data not found
F015 Format error
Error Description Cause
Software Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
Hardware/software
battery and installing it again. If the error still
Software
persists, perform a device check.
Hardware
Hardware
Hardware
Software
Software
Data
Data Format the SD-card at the audio player or
SD-Jukebox.
Data Release the SD-card lock.
Data Either format the SD-card, or replace it.
Data
Data
Software/data Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
Software/data
battery and installing it again. If the error still
Hardware/software
persists, perform a device check.
Software
Software
18
Countermeasure