Panasonic SV-SD350VGC Service Manual page 17

Error Code
8066 Request for other task failed
8067 No vacancy in MSG processing queue
8069 Sector information setting error
806D TKI table error
806E Insufficient stream error
8080 Argument error
8081 CHG PARAM doesn't change
8082 PPAUSE is not ON
8083 READ interrupt is not generated
8084 CHGACK interrupt is not generated
8088 Resist reading is abnormal
8089 ACORE not initialized
808A No SMUTE CBF wait
808C BG Buffer Over
8093 ACORE not initialized
8095 BG Request Nothing
μ code check error
8098
809C No READY interruption at BG processing
809D No CHGACK interruption at BG processing
80A2 msg transmission buffer full
B064 Insert other than SD card (all commands)
B065 Writing is improper (all commands)
B066 Mount is not available (at formatting)
B06B Formatting ended in error (at formatting)
B070 File reading ended in error (at track protect/delete)
B071 File reading ended in error (at track protect/delete)
B072 File deletion ended in error (at track delete)
B073 File reading ended in error (at track protect/delete)
B075 Formatting ended in error (at formatting)
B076 Authentication processing ended in error
(all commands)
B077 Card driver ended in error (all commands)
B078 File deletion ended in error
B07B File deletion ended in error (at track delete)
B07C File deletion ended in error (at track delete)
B081 Editing ended by unknown error
B082 Track deletion disabled (Locked) (at track protect)
B083 SD_VCyyy directory deletion ended in error
(at track delete)
B084 SD_VCyyy directory reading ended in error
(all commands)
D001 Message not received
E001 Message not received
E002 No vacancy at MSG processing queue
E003 Sector information setting error
E004 Playback-disabled stream
E005 CODEC specifications violation
E006 Insufficient stream error
E008 ERROR at ACORE
E009 No card
E00A No playback-enabled file
E00B Inserted card is not an SD-card
E00C Card format error
E00D LOCKED card error
E00E TKM file check error
E00F MOB file check error
μ code check error
E080
E081 No READY interruption at BG processing
E082 msg transmission buffer full
E083 BG Buffer Over
E084 BG Request Nothing
E085 Argument error
E0A0 FS file error
E0A1 FS directory error
E0A2 FS error
Error Description Cause
Software Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
Software
battery and installing it again. If the error still
Software
persists, perform a device check.
Software Either format the SD-card, or replace it.
Software
Software Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
Hardware
battery and installing it again. If the error still
Hardware
persists, perform a device check.
Hardware
Hardware
Hardware
Software
Software
Software
Software
Software
Data
Hardware
Hardware
Software
Data
Data
Data
Software/data
Software/data
Software/data
Software/data
Software/data
Software/data
Software/data
Software/data
Software/data
Software/data
Software/data
Software/data
Software Release the SD-card lock.
Software/data Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
Software/data
persists, perform a device check.
Software
Software
Software
Software
Data
Data
Hardware/software
Hardware/software
Hardware Insert an SD-card.
Data Either perform a recording at the audio player, or
replace the SD-card with a card that contains a
recording.
Data Format the SD-card at the audio player or
SD-Jukebox.
Hardware/software
Hardware/software Release the SD-card lock.
Data Either format the SD-card, or replace it.
Data
Data Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
Hardware
battery and installing it again. If the error still
Software
persists, perform a device check.
Software
Software
Software
Data
Data
Software
17
Countermeasure