Panasonic KX-TDE100 Getting Started page 35

4.2 Programming the Virtual 16-Channel VoIP Gateway Card
2. a.
From the system menu, click CO & Incoming
Call.
b.
Click CO Line Settings.
c.
Type the CO Name and assign an unused
Trunk Group Number to be used for all IP
trunks.
d.
Click OK.
3. a.
From the system menu, click System.
b.
Click Numbering Plan.
c.
Click Main.
d.
Click the Other PBX Extension tab.
e.
In the Other PBX Extension Numbering
(TIE) box, type a starting digit of destination
extension.
f.
Click OK.
4. a.
From the system menu, click Private
Network.
b.
Click TIE Table.
c.
In the Leading Number box, type the starting
digit of destination extension.
d.
Click OK.
5. a.
From the system menu, click Configuration.
b.
Click Slot.
c.
Move the mouse pointer over the installed V-
IPGW16 card to display the menu of options.
d.
Click Ous.
You will see a confirmation message.
e.
Click Yes.
f.
Move the mouse pointer over the installed V-
IPGW16 card to display the menu of options.
g.
Click Shelf Property.
Getting Started for Virtual IP Cards 35