Panasonic KX-TDE100 Getting Started page 17

Connecting an AC Adaptor to an IP Telephone
IP-PTs and some SIP Extensions comply with the IEEE 802.3af Power-over-Ethernet (PoE) standard. If PoE
is available on your network, these IP telephones can receive the necessary power supply from the network
through the network cable. In this case, no AC adaptor is needed for the IP telephones.
However, if PoE is not available, you will need to connect an AC adaptor to the IP telephone.
Note
Use only the specified type of AC adaptor for each IP telephone. For details, refer to the documentation
of your IP telephone.
Example: KX-NT346
To Wall Socket
AC Adaptor Cord
2.6 Connecting to the LAN
Getting Started for Virtual IP Cards 17