Cleaning The Hook-In Racks; Removing And Fitting The Appliance Door; Cleaning The Door Panels - Bosch HBC53B550A Instruction Manual

is cold. Never treat the self-cleaning surfaces with a scouring
pad or oven cleaner.

Cleaning the hook-in racks

You can remove the hook-in racks for easier cleaning.
ã=
Risk of burning due to hot components in the cooking
compartment!
Wait until the cooking compartment has cooled down.
Push the hook-in rack upwards at the front and unhook to the
1.
side.
Pull the hook-in rack forwards at the rear and unhook to the
2.
side.

Clean the hook-in racks with washing-up liquid and a sponge
3.
or brush.
Align the hook-in rack with the indentation (a) facing
4.
upwards, so that the shelf heights match.
Insert the hook-in rack at the rear until the limit stop.
5.
Push the hook-in rack towards the rear.
6.
Insert the hook-in rack at the front until the limit stop.
7.
Push the hook-in rack downwards.
8.

Removing and fitting the appliance door

You can remove the appliance door to clean it more
thoroughly.
ã=
Risk of injury!
The hinges of the appliance door may snap shut with great
force. Always open the hinge locking lever fully when removing
the appliance door and close it fully after refitting. Do not reach
into the hinge.
ã=
Risk of injury!
If the appliance door has only been unhinged on one side, do
not reach into the hinge. The hinge can snap back with great
force. Call the after­sales service.
Removing the appliance door
Open the appliance door fully.
1.
Open the locking levers on the left and right-hand side fully.
2.
10

The hinges are secured and cannot snap closed.
Close the appliance door until resistance becomes
3.
noticeable (figure A)
With both hands, grip the door on the left and right-hand side,
4.
close the door a little more and pull it out (figure B).
$
Fitting the appliance door
Insert the hinges in the left and right-hand holders (figure C).
1.
The notch on both hinges must engage.
Open the appliance door fully.
2.
Close the locking levers on the left and right-hand side fully
3.
(figure D).
&
The appliance door is secured and can no longer be
removed.
Close the appliance door.
4.

Cleaning the door panels

To facilitate cleaning, you can remove the inner door panels
from the appliance door.
ã=
Risk of injury!
The components inside the appliance door may have sharp
edges. Take care not to cut yourself. Wear protective gloves.
ã=
Risk of injury!
The appliance must not be used again until the door panels
and appliance door have been correctly fitted.
Removing the door panel
Note: Before removing, make a note of the orientation in which
the door panel is fitted, so that it is not refitted the wrong way
round.
Unhook the appliance door and lay it on a soft, clean surface
1.
with the front side facing downwards (see section: Removing
and installing the appliance door).
%
'