Self-service CRUs
Replacing the keyboard or mouse
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Disconnect the old keyboard or mouse cable from the computer.
3. Connect a new keyboard or mouse to the appropriate connector on the computer.
Figure 7. Replacing the keyboard or mouse
Replacing the power adapter
Attention: Do not open the computer or attempt any repair before reading and understanding "Read this
first: Important safety information" on page iii in this document.
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
3. Replace the power adapter.
Note: Your power cord might look different from the one illustrated.
24
M710q User Guide
Non-CRUs
17
Storage drive
18
Storage drive bracket
19
Wi-Fi card shield
20
Wi-Fi card
21
Wi-Fi antennas
22
Heat sink