Led Indication; Recover Jetflash; To Recover Jetflash In Windows 98Se - Transcend USB JetFlash User Manual

Record LED
(Red)
off
off
off
off
off
off
off
off
on
normal blink
on
on
on
on
on
If your JetFlash is ever damaged, you can use the Recovery program to restore its
default settings.
Running the Recovery program will erase all the data on the JetFlash.
If there are bad blocks in the flash memory chip of JetFlash, the memory size of
JetFlash after running the Recovery program will be smaller than the original
memory size.

To Recover JetFlash in Windows 98SE

1. Put the Driver CD into the CD-ROM (Auto-Run supported).
2. Remove the battery from JetFlash.
3. Press and hold the PLAY/PAUSE
USB port.

LED Indication

Power/Play LED
(Green)
off
fast blink
on
normal blink
normal blink
normal blink
normal blink
normal blink
on
off
normal blink
normal blink
normal blink
normal blink
normal blink

Recover JetFlash

Repeat LED
(Orange)
off Power off
off Data transfer
off Power on (in MP3 mode)
off Play MP3 music
on Repeat a track
normal blink Repeat all tracks
The beginning of the portion you wish to
fast blink
repeat is marked in MP3 mode
slow blink Repeat a portion of one track
off In Record mode
off Record voice
off Play the recorded file(s)
on Repeat a recorded file
normal blink Repeat all recorded files
The beginning of the portion you wish to
fast blink
repeat is marked in Record mode
slow blink Repeat a portion of one recorded file
button, then plug JetFlash into an available
13
Status