Led Indication; Recover Jetflash; To Recover Jetflash In Windows 98Se - Transcend 128 User Manual

Record LED
(Red)
off
off
off
off
off
off
off
off
on
normal blink
on
on
on
on
on
Never use the Format functions of Windows, Macintosh or Linux to format your JetFlash. If
your JetFlash is ever damaged, you can use the Recovery program to restore its default settings.
Running the Recovery program will erase all the data on the JetFlash.
If there are bad blocks in the flash memory chip of JetFlash, the memory size of JetFlash
after running the Recovery program will be smaller than the original memory size.

To Recover JetFlash in Windows 98SE

1. Put the Driver CD into the CD-ROM (Auto-Run supported).
2. Remove the battery from JetFlash.
3. Press and hold the PLAY/PAUSE
port.
Do not release the PLAY/PAUSE
completed.

LED Indication

Power/Play LED
(Green)
off
fast blink
on
normal blink
normal blink
normal blink
normal blink
normal blink
on
off
normal blink
normal blink
normal blink
normal blink
normal blink

Recover JetFlash

Repeat LED
(Orange)
off Power off
off Data transfer
off Power on (in MP3 mode)
off Play MP3 music
Repeat a track
on
normal blink Repeat all tracks
The beginning of the portion you wish
fast blink
to repeat is marked in MP3 mode
slow blink Repeat a portion of one track
In Record mode
off
off Record voice
off Play the recorded file(s)
on Repeat a recorded file
normal blink Repeat all recorded files
The beginning of the portion you wish
fast blink
to repeat is marked in Record mode
slow blink Repeat a portion of one recorded file
button, then plug JetFlash into an available USB
button until the Recovery procedures are
12
Status