Neutrik True One Ac Input Connector - Philips VARI-LITE VL4000 Service Manual

❋
VARI LITE - VL4000 B

Neutrik True One AC Input Connector

Vari-Lite Part No: 25.9704.0830
To replace Neutrik True One AC input connector:
Step 1. Remove connector side enclosure cover following the procedure described in
Enclosure Covers Removal" on page
Step 2. Disconnect wiring from Neutrik True One connector.
Step 3. At front, remove 2 x 4-40 x 3/8" PFB screws.
Screws
Step 4. Inside enclosure, remove backing plate and set aside. It will be reinstalled with replacement
connector.
Step 5. Remove Neutrik True One connector.
Step 6. Replace in reverse.
38
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
W L
EAM ASH UMINAIRES
S M
ERVICE ANUAL
24.
"Upper
Backing
Plate
Neutrik True
One Connector
Note:
Drawing exploded and some
components removed for clarity.
02 .9 704 .60 10 A