Table of Contents
Advertisement
Loudness refers to boosting the bass
and treble at low volume levels to match
the ear's sensitivity.
Press the AUD/LD button = for
about two seconds.
If loudness is switched on, LD shows in
the display.
The loudness boost can be set in steps
from one to six.
Press the MENU button 8.
"MENU" appears in the display.
Press the
or
"LOUDNESS" appears in the dis-
play.
Press the
or
just the boost.
Press the MENU button 8 or OK
;.
button : until
button : to ad-
This device has a parametric digital
equalizer. In this case, parametric
means that in each of the five filters, one
individual frequency can be emphasised
or reduced (with a gain of +8 to -8).
The following filters are available:
SUB LOW EQ
LOW EQ
MID EQ
MID/HIGH EQ
HIGH EQ
These filters can be set without using
any measuring instruments. You can use
them to make a significant difference to
the properties of the sound in the vehi-
cle.
For the purposes of this adjustment, we
recommend you use a cassette you
know well, or a CD if a CD changer is
connected.
Before making any adjustments to the
equalizer, set the tone and volume con-
trols to zero and deactivate loudness.
For more information on this, read the
section on "Tone and volume controls".
Listen to the cassette or CD.
Assess the sound you hear.
Now consult the "Equalizer Adjust-
ment Guide" table for "Sound Qual-
ity".
Adjust the equalizer values as de-
scribed under "Action".
32 - 50 Hz
63 - 250 Hz
315 - 1,250 Hz
1,600 - 6,300 Hz
8,000 - 12,500 Hz
55
Advertisement
Table of Contents
