Chapter 2 LT140 Installation
2.3 Installation Area
•
The adapter block is not inserted correctly in the square holes due to the gap between the adapter block
and the rack prop.
There is the gap between the adapter
block and the rack prop
Rack prop: side view
•
The adapter block is mounted in the first square hole from the bottom of the mount surface.
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Site Planning-
The adapter block is not inserted
correctly in the square holes
Rack prop: front view
Mount surface
27
Copyright 2018 FUJITSU LIMITED
P3AG-3712-01ENZ0