Chapter 1 Hardware Configuration; Module - Fujitsu Storage ETERNUS LT140 User Manual

Chapter 1
Hardware Configuration
This chapter describes the hardware module configurations for the LT140.
All components such as operator panels, MailSlot, magazines, drive modules, cells, robots, tape drives, and
power supply units are installed in System.
The following sections describe components that must be considered when installing the LT140.
Refer to "FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Installation & Operation-" for major
components that are not described in this manual.
1.1

Module

Two types of Modules are available for the LT140: a Base Module and an Expansion Module.
Major components are installed in each module.
The following figures show various views of the LT140.
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Site Planning-
10
Copyright 2018 FUJITSU LIMITED P3AG-3712-01ENZ0