Sony UPX-DP10 Operating Instructions Manual page 15

To cancel a selection made by pressing b or B, or
to cancel an operation in progress, press this side.
SET: An item selected by pressing MODE, b, or B
of the mode button is registered.
b, B: A picture to display, erase or protect is set.
Also press these sections to select items in the
MODE screen.
qa Metal contacts
For connection with the station. Always keep them
clean. If they become dirty, clean them with a cotton
swab, etc.
qs Tripod screw hole (28)
Used to attach the camera to the tripod. A quick shoe
can be also attached.
qd Standby lamp (41)
The lamp is lit or flashing to indicate the following
conditions when the PLAY/CAMERA switch is set to
CAMERA.
Flashing in red: Preparing for recording, charging
the flash, storing the data (recording is disabled).
Lit in red: Memory full
Flashing in green: Manual setting for exposure, iris
or white balance
Lit in green: Standby for recording
qf Viewfinder (45)
You can see the subject through the viewfinder and
can shoot a picture without using the LCD monitor.
15