TP-Link TD-W8900G User Manual page 32

The information is same as the information in Figure 5-3.
2. PPPoE
If you choose PPPoE in the previous screen (shown in Figure 5-5), the configuration is
similar to PPPoA, the only difference is that you should set the PPPoE Service Name on
the corresponding screen. You can refer to
connection type.
3. MER
If you choose MER in the previous screen (shown in Figure 5-5), you can see the screen
(shown in Figure 5-9). Follow the instructions to configure the connection.
1) Configure the WAN IP Address. If you are provided a dynamic IP Address, please select
obtain an IP address automatically, and then the Router will automatically get IP
parameters from your ISP. If you are provided with a static IP Address, please select Use
TD-W8900G 54M Wireless ADSL2+ Router User Guide
Chapter 4
Figure 5-9
25
to achieve the configuration for the