TP-Link TD-W8900G User Manual page 29

service, the Quality of Service menu will be added to the Web-based Utility, the detailed
configuration will be described in
2. Select the Connection Type in the next screen (shown in Figure 5-5).
1) Select the Connection Type and Encapsulation Mode your ISP has instructed you to
use, the default connection type is Bridging.
2) If you want to add to an assigned VLAN, please select the Enable 802.1q check box,
and enter the VLAN ID.
3) Click the Next button to go to the next screen to make further configurations for the WAN
Port, or else click the Back button to go to the previous screen to make modifications.
Note:
802.1q VLAN tagging is only available for the connection type of PPPoE, MER and Bridging.
After you select the Connection Type, please follow the instructions below to complete the
further configuration of WAN Interface. There are five different configurations for the connection
types, which are PPPoA, PPPoE, MER, IPoA and Bridge. You can select the corresponding
types according to your needs. Note that this User Guide adopts different VPI, VCI and QoS to
introduce further configuration for the different connection types below, if you need to change the
configuration of ATM PVC (VPI, VCI and QoS), you should go to the previous screen (shown in
Figure 5-4) to configure them again.
TD-W8900G 54M Wireless ADSL2+ Router User Guide
5.4.5 Quality of Service.
Figure 5-5
22