External Audio Sources; Switching The Aux Input On/Off; Technical Data; Amplifier - Blaupunkt SANTA CRUZ MP36 Operating Instructions Manual

External audio sources

External audio sources
If no CD changer is connected to the device,
you can connect an external audio source.
Audio sources can, for example, be port-
able CD players, MiniDisc players or MP3
players.
If you want to connect an external audio
source, you will need an adapter cable.
You can obtain this cable (Blaupunkt no.:
7 607 897 093) from your authorised
Blaupunkt dealer.
The AUX input must be activated in the
menu.
Note:
If no CD changer is connected to the
device, the AUX menu item cannot be
selected.

Switching the AUX input on/off


Press the MENU button 9.

Press the or
ly until "AUX OFF" or "AUX ON" appears
on the display.

Use the buttons : to select be-
tween the options "AUX ON" and "AUX
OFF".
When you have finished making your chang-
es,

press the MENU button 9.
Note:
If the AUX input is switched on, you can
select it by pressing the SOURCE but-
ton 4.
60
button : repeated-

Technical Data

Amplifier

Output power:

Tuner

Wavebands:
FM :
MW :
LW :
FM frequency response:
CD
Frequency response:

Pre-amp out

4 channels:

Input sensitivity

AUX input:
Tel./Navi input:
Weight
Subject to changes
Technical data
4 x 18 watts sine
at 14.4 V and
1% distortion
factor at
4 ohms.
4 x 26 watts sine
in accordance with
DIN 45324 at
14.4 V at 4 ohms.
4 x 50 watts max.
power
87.5 - 108 MHz
531 - 1 602 kHz
153 - 279 kHz
35 - 16,000 Hz
20 - 20,000 Hz
2 V
2 V / 6 kΩ
10 V / 1 kΩ
1.36 kg