Table of Contents
Advertisement
15.
Maintain a safe working environment. Keep the work area well lit. Make sure there
is adequate surrounding workspace. Always keep the work area free of obstructions,
grease, oil, trash, and other debris. Do not use a power tool in areas near flammable
chemicals, dusts, and vapors. Do not use this product in a damp or wet location.
16.
Avoid unintentional starting. Make sure you are prepared to begin work before
turning on the Cutout Tool.
17. Never leave the Cutout Tool unattended while running. Turn power off if you have
to leave the Cutout Tool.
18. Before each use, check all nuts, bolts, and screws for tightness. Vibration during
operation may cause these to loosen.
19.
Only use bits rated @ or above 22,000 RPM.
WARNING!
People with pacemakers should consult their physician(s) before using this product.
Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.
WARNING!
Some dust created by power sanding, sawing, grinding, drilling, and other construction activi-
ties, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or
other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures
varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a
well ventilated area, and work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles. (California Health & Safety Code 25249.5, et seq.)
1.
Read all instructions and warnings on the battery before charging the battery.
2.
To avoid accidents, charge the supplied battery only. Do not use a different charger
with this battery.
3.
Do not expose the battery to rain or wet conditions.
4.
To avoid damage of cable and plug, never pull the cable to disconnect the charger.
5.
Do not use the charger if the cable or plug are damaged.
6.
Repairs should be carried out by a qualified technician.
7.
Do not touch the battery poles with any conductive source.
8.
Do not store the battery in a box with other metal objects.
9.
Do not throw the battery in a fire or in the general trash. Contact your local hazardous
waste disposal authority for proper disposal.
10.
Do not drain the battery completely before recharging. Recharge fully.
11.
Always remove the battery from the tool before performing inspection, maintenance,
cleaning procedures, or storage.
12.
After initial 8 hour charge, never charge Battery for more than 2 hours continuously.
Charger Adapter should not be left plugged in or charging for more than 8 hours.
SKU 92879
BATTERY PRECAUTIONS
(1)
For technical questions, please call 1-800-444-3353
Page 5
Advertisement
Table of Contents
