Table of Contents
Advertisement
Motor
Battery
Switch Type
Battery Charger Adapter
Cutting Depth
Collet Size
Mill Cutter Sizes
Overall Dimensions
Accessories
Weight
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious injury.
1.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
4.
Stay alert. Watch what you are doing, and use common sense when operating a
power tool. Do not use a power tool while tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while operating power tools may
result in serious personal injury.
SKU 92879
SPECIFICATIONS
Item
18 VDC; 20,000 RPM ± 10 % (no load)
18 VDC, NI-MH, 1300 mAh; power level display
Toggle: On / Off
Input: 120 VAC/60 Hz; Output: 22 VDC, 1.3A;
Charge time: one hour; Line cord: Two-prong,
polarized
1 inch (maximum)
0.35 inch (9
1/8 and 1/4 (dia.) inch
15 x 14 x 4.5 inches
Milling circle cutting jig (up to 12 inch circle)
Plastic case
10.6 lbs.
SAVE THIS MANUAL
GENERAL SAFETY RULES
WARNING!
SAVE THESE INSTRUCTION
For technical questions, please call 1-800-444-3353
Description
)
MM
Page 2
Advertisement
Table of Contents
