Frame Advance; Double Speed Playback; Jog Dial Operation; Shuttle Dial Operation - Toshiba W-707 Owner's Manual

Frame Advance

A picture advances frame by frame.
1
Press PLAY during still playback.
Each time you press PLAY , the picture
advances one frame.
If you press and hold PLAY , the tape runs at
1/30th the normal playback speed.
To resume normal playback
Press PAUSE/STILL .
Note
If you playback a tape recorded in the SLP tape speed or a tape recorded on another VCR in various speed
mode, the picture may be noisy or monochrome.
22

Double Speed Playback

A tape runs at twice the normal speed.
1
Press PLAY during playback.
The picture runs at twice the normal playback
speed.
To resume normal playback
Press PLAY .

Jog Dial Operation

You can control the speed of frame advance.
1
During playback, press PAUSE/STILL .
2
Turn the jog dial on the Remote Control.
The speed of frame advance varies as you turn the jog dial.
When you stop turning the dial, the picture freezes.
To cancel the jog dial mode
Press PAUSE/STILL .

Shuttle Dial Operation

You can also activate the picture search and slow playback at
various speeds by turning the shuttle dial on the VCR or
Remote Control.
1
Turn the shuttle dial on the VCR or Remote Control.
The playback speeds differ depending on the recording tape
speed of the tape as follows.
Picture search
SP: x5 x7
SLP: x15 x21
Notes
• The still picture mode will be released automatically after about 5
minutes and forward playback will start.
• Fast-forwarding or rewinding started from the stop mode continues even
if the shuttle dial is released. To stop, press STOP .
• The reverse playback mode will be released automatically after about
25 seconds and forward playback will start.
• Noise bar may appear in reverse playback.
Initial mode of tape operation
Stop
Playback
Still
Reverse playback
-x1
-x3