Operation Symbols; Quickstart Label Symbols - Champion 100326-1 Operator's Manual

100326-1 - 25 TON FULL BEAM LOg SPLiTTER

Operation Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
SYmBOL
STOP or OFF
Fuel/Gasoline Valve ON/OFF

Quickstart Label Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
Starting the Engine

move log splitter outside and far away from windows,
doors and intake ventilation covers.
1. Check oil level.
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
Recommended oil is 10W-30.
2. Turn the fuel valve to "ON" position.
3. Move choke lever to "ChOKE" position.
4. Pull the recoil cord.
5. Move the choke lever to "RUN" position.
mEaNING
1 2
10W-30
4
DANgER
Artwork Notes
3mm corner radius; 2mm safe margin; to be printed
on WHITE substrate.
SYmBOL
1
3
2
5
Stopping the Engine
LPN 2107-L-OP
In an emergency, turn the engine switch to the "OFF"
Rev A
position.
K
Size 75 x 35 mm
Under normal operation:
Revision Changes
---
1. Turn the fuel valve to the "OFF" position.
2. Let the engine run until fuel starvation has stopped the
engine. This usually takes few minutes.
Important: Always ensure that the fuel valve is in the "OFF"
position when the engine is not in use.
11
iMPORTANT SAFETY iNSTRUCTiONS
mEaNING
Fuel Gauge: Full
Fuel Gauge: Empty
2107-L-OP-A
Colors
376 485 152 CG1