Table of Contents
Advertisement
Setting details
Sound
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
On: Loud sound such as explosion or similar is toned
down slightly when played back. This makes it
suitable for when it is connected to a stereo.
Off: It plays back at the recording level on the disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
Parental
Parental control setting
Some discs are specified not suitable for children.
Such discs can be limited not to play back with the unit.
1) Press
or
to select "Parental", then press
or
until the level you require appears.
• Level Off:
The parental control setting does not
function.
• Level 8:
All DVD software can be played back.
• Level 1:
DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press
or
to select "Password".
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CANCEL.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting cannot
be changed unless you enter the correct password.
4) Press EJECT to activate parental control setting.
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says "adult." For
those discs, the age restriction will not work.
J5N00201A [E] (P45-46)
Language Picture
Sound
Parental Other
DRC
On
On
Off
/Enter/Setup/Return
Language
Picture
Sound
Parental Other
Password
Parental
Off
0 9/Cancel
/Enter/Setup/Return
45
To change the parental level
1) Press
or
to select "Password".
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press
or
to select "Parental", then press
or
to change the parental level.
5) Press
or
to select "Password", then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
If you forget the password...
1. Press EJECT.
2. Remove the disc after the disc comes out.
3. "No Disc" appears on the screen.
4. While holding STOP down on the top of the unit, press
7 on the remote control. "PASSWORD CLEAR" ap-
pears on the screen.
5. Enter a new password again.
Notes:
• Depending on the discs, the unit may not be able to limit
playback.
• Some discs may not be encoded with specific rating level
information though its disc jacket says "adult."
For those discs, the parental control feature will not work.
Other
OSD Language
The setup language can be selected.
English:
To display OSD language is English.
Francais: To display OSD language is Francais.
Espanol: To display OSD language is Espanol.
Note:
If each setup (pages 44 and 45) has been completed, the unit
can always be worked under the same conditions (espe-
cially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
6/8/04, 7:09 PM
Language
Picture
Sound
Parental
Other
OSD Language English
English
Francais
Espanol
/Enter/Setup/Return
45
Advertisement
Table of Contents
