Husqvarna K1270 II R Operator's Manual page 12

Hide thumbs Also See for K1270 II R:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Maintenance
Clean the external surfaces
of the product.
Clean the cold air intake.
Clean the spark plug.
Clean the fuel tank.
Do a general inspection.
Examine the throttle lock-
out*.
Do a check of the stop
switch*.
Do a check for fuel leaks.
Do a check of the vibration
damping system*.
Examine the muffler*.
Examine the carburetor.
Examine the starter hous-
ing.
Examine the fuel system.
Examine the air filter.
Examine the drive gear and
the clutch.
To clean externally
Flush the product externally with clean water after
each day of operation. If it is necessary, use a brush.
To clean the cold air intake
Note: A dirty or blocked air intake makes the product too
hot. This can cause damage to the piston and cylinder.
12
Daily
X
X
X
X
X
X
Weekly
X
X
X
X
Clean the cold air intake if it is necessary.
Remove blockage, dirt and dust with a brush.
To examine the spark plug
Note: Always use the recommended spark plug type.
Use of the incorrect spark plug can cause damage to the
Monthly
X
X
X
X
X
1390 - 001 - 10.01.2020

Advertisement

Table of Contents
loading

Table of Contents